Magnetic High Pressure Heat Press Machine with slide-out press bed(SHP-24LP2MS)
1) Semi-automatic Heat Press Machine
2) Unique Electro-Magnetic pressure system
3) Floating head design to ensure even contact Automatic open after the timer cycles out.
4) New design with Slide-out press bed
5) Easy textile layout and away from heat.
6) Thick heat plate for high pressure
8) Baked on teflon coat
9) Voltage: 220V/110V
10) Heat Platen: 15''X15''/16''X20''/16''X24''
Anti-rust Handling: All the iron parts of our machine are anti-rust handled before using them to produce machine. In this way, all our machines are rusty free for more than one year, even in a very wet environment.
Baked onTeflon Coat: All the heat platens are baked on Teflon coat in High-tempearture Industrial Oven under 200 degree Celsius for 30 minutes. Make sure the platens are Scratch-resistant and long usage life.
Heat Platen Test: Each Signle Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get five years worry free warranty.
Quality Control on Finished Machine: All Microtec heat presses are strictly tested under the following procedures before shipping out.
1) Turn on the machine, let it heating up to 200 degree Celsius.
2) The temperature stay at 200 degree Celsius for at least 20 minutes
Package: All the machines are packed in two boxes with full wrapped styofoam and there are manual instructure offered for each set of machine.